Thrasher Foundation Repair Before & After Photos

This homeowner had a hot tub in the middle of his patio. The concrete under was starting to settle, and he did not want water pooling up next to his home. He was having troubles getting anyone to come out to look at this. He saw Thrasher's ads, and decided to give us a go. He liked that we were local and family owned! System Design Specialist, Brock Scott, came out to meet with him. Brock determined the concrete along the home was settling due to fill soil, and water collection. He also noticed the weight of the hot tub was not helping. Brock proposed we seal up the joint along his home with NexusPro Join Sealant, as well as his expansion joints to prevent the area around them from settling. He also proposed we use PolyLevel foam to lift and level the concrete back to where it belongs. Even though the hot tub could not be moved completely out of the way, we were still able to get this project completed. This homeowner was so happy with the finished product! There is no doubt that he is relaxing in his hot tub, worry free of any more settling or unwanted water collection.  

Jimmy had water coming in through the cold joints of his basement, causing mold and anxiety about his home. Cold joints are where the footing of your home, meets the foundation walls. Through time, the soil outside of the home begins to crack and shift, which allows water to build up pressure. Once there is too much pressure, there is only one way the water can go, into your basement. After one of our expert team members evaluated the space, they were able to come up with a solution that would keep Jimmy's basement dry, and guarantee he could live stress-free. 

For Jimmy's home, a full perimeter WaterGuard was installed. This is a system that is laid next to the footing of the home, with perforated holes in the back. This allows for any water that comes through the cold joint, to be redirected to a Sump Pump, ultimately pushing the water up and out of the basement. Keeping the entire area dry. 

This customer was getting ready to sell her house and didn't want water damage to prevent the sale. So she called Thrasher to come out and inspect her home. Upon inspection, we found that the home's foundation had a lot of damage with moisture, broken walls, and sagging beams. To fix these issues, we installed WaterGuard, a full wall of CleanSpace, and installed a TripleSafe sump pump to control water. We swapped some anchor plates under warranty, we added new PowerBraces to another wall for more support. And we also added supplemental beams and Smart Jacks to support failing beams and sagging joists.

The customer was very happy with how everything turned out and relieved she didn't have to worry about these issues anymore.

Homeowner Jeff wanted to find a home in this community and knew that it would need some improvements.  He wanted to start by stabilizing and protecting the homes foundation .

System Design Specialist Shane McClintic visited the home to provide a same day free estimate.  We installed Waterguard to protect the home from water in the basement with Cleanspace around the perimeter for maximum protection.  We added a Triplesafe sump pump that eliminates worry even when the power goes out and installed Powerbraces on each wall to permanently stabilize them.

These homeowners wanted to use their patio more and entertain guests. But all over their patio, the concrete was sinking and settling, causing several tripping hazards. That's why they called Thrasher to fix it. Our very own Chad Williams visited the home to inspect the concrete and propose a solution. He found the control joints on the patio were never sealed. Which had allowed water to compromise the integrity of the soil under the concrete slabs and cause an uneven walking surface.

To fix, we used PolyLevel foam to lift and level. Then we used NexusPro joint sealant to prevent water from entering. The customers were happy with the results and are excited to host get-togethers with NO tripping hazards!