Concrete Repair Services Before & After Photos

This was a unique job where the homeowner saw snakes consistently come out from under the sidewalk and back patio. When we inspected, we found several voids under her sidewalk, due to soil drying out. It was so bad that if you stood in the yard, you could visibly see the holes under the sidewalk. To fix this, we used PolyLevel, a polyurethane foam that fills all the voids underneath concrete and compacts the soil to permanently lift the slab to its original position. The crazy thing is, when we started the repair, a copperhead snake came out! We were able to remove the snakes and fill those voids so no new snakes would make a home under there again. 

This homeowner wanted to fix their cracked driveway before putting their home on the market. When we performed the inspection, we found that the front driveway slabs and back patio were settling really badly. This can occur for three reasons:

1. The soil was poorly compacted when the home was built.
2. Water was entering through the broken control joints and washing out the soil. 
3. The soil dried out underneath the slabs and created voids. When this happens, the slabs loose the support from the soil and sink into the voids.

Luckily, we have solutions to fix these issues. To lift and level the concrete, we used PolyLevel, a polyurethane foam that's injected underneath the slab that will compact the soil underneath and fill the void space. And for the control joints and cracks, we used NexusPro Joint Sealant to seal the concrete and keep water from penetrating the surface.

This homeowner wanted to remove trip hazards and make her walkways look better. Her concrete walkway was sinking and settling, which was an eyesore on the front of their home. When we inspected, we found that the soil below the sidewalk had washed out, which was causing the concrete to drop into the voids. To fix, we lifted and leveled the sidewalk with PolyLevel, a foam that is injected to stabilize the concrete. Next, we used NexusPro to seal all the cracks and joints to prevent water from entering and washing out the soil again.

This homeowner was dealing with a repetitively sinking compression guard, creating a trip hazard. The fix the sinking concrete slabs, we used PolyLevel, an injectable foam, to lift the driveway back to its original position. After the PolyLevel, we re-set the compression guard. 

This homeowner wanted to avoid replacing their concrete and find a different solution to fix their cracked driveway. After inspection, we determined the best solution would be to use our three part concrete protection system. This protection system includes PolyLevel to lift and level the slab back to its original position, NexusPro to fill in cracks and joints, and then top it off with SealantPro, to seal and prevent further water intrusion.