Thrasher Foundation Repair Before & After Photos

This homeowner was ready to remodel the upstairs of her home, when she noticed that all the floors were sloping towards the middle of the home. She recognized that something was wrong and unstable about her home, so she wanted to fix this issue before remodeling. She gave us a call to have an inspection done on her home.

We sent System Design Specialist Anthony Salcedo to inspect the foundation and give the customer a comprehensive explanation of the problem. Anthony noticed that the floors were sagging due to an interior support beam that was sloping significantly due to a lack of support posts. Anthony and his team knew just what to do, so they began work right away when the customer decided on the solution she would move forward with. The team removed both existing posts and began drilling two helical soil nails deep into the earth. The Helical Piers System can support our SmartJacks, which were then installed so that the home's support beam now has proper support posts that run deep into the earth. 

The homeowner was very impressed with the whole process and the installation. Check out her home's new support system!

These homeowners are loyal customers of Thrasher. They initially were hopeful that their foundation walls only needed a PowerBrace System to stabilize their foundation over time, however they noticed that their walls were still collapsing in the house regardless of how tight they made their PowerBrace System. Knowing of their warranty and other options we offer, they gave us a call to find a new solution.

We sent Service Technician Jason White to find a new solution to the collapsing foundation walls. Jason gave these homeowners our Ever Brace System to stabilize the foundation walls. The homeowners were extremely happy that we were able to help them again and they were thankful that we are able to know their problem and discuss options to solve it. Check out their new Ever Brace System!

This homeowner was concerned about the cracks on his concrete right next to his home's foundation. He saw us doing work for a neighbor, and so he decided to give us a call to see what we could do to help his concrete problem. 

We sent System Design Specialist Travis Hickman to inspect the concrete and see what was causing the cracks. Travis found that the concrete had settled roughly 2 inches and the cracks were caused by this. The soil underneath the concrete had eroded, leaving a void for the concrete to settle into below the surface. Being familiar with concrete repair, Travis discussed that this could be fixed and the homeowner was very happy. Travis and his team used PolyLevel to lift and stabilize the settled concrete back to its original position. 

Check out this concrete lift!

This homeowner wanted to finish her basement for her family. She was having problems with water leaking into her basement and she was unsure of the source. She called us for annual maintenance then asked us to review this water problem as well.

We sent Service Technician Andrew Davis to inspect the basement and figure out the source of this water. Andrew determined that one of the walls was failing and that was where water was creeping into her basement. The homeowner wanted this problem fixed right away, so she opted for waterproofing solutions and foundation wall repair. Andrew and his team got to work on installing PowerBrace Wall Repair System to secure the failing wall. Then, they used WaterGuard Interior Drainage System and CleanSpace Basement Wall Vapor Barrier to successfully waterproof the homeowner's basement.

The homeowner was very happy and shocked at how quickly our crew was able to help her. Check out her basement transformation!

These homeowners recently bought their home and planned to start remodeling it soon. Before their remodel however, they noticed that there were unlevel floors on the second floor. Wanting to ensure that everything would go well with the remodel, they called us.

We sent System Design Specialist Anthony Salcedo to inspect the upstairs floors and determine what the cause of this issue was. Anthony sound that the support beam in the basement has sinking issues and that the floor had heave issues. He found the root cause of this problem to be that the support posts holding up the support beam was failing and needed to be replaced. Anthony and his team got right to work after discussing with the homeowners the best course of action. The team installed SmartJacks and expansion joints to support the basement support beam and ensure that the posts would not move even if the support beam were to heave or sink. This combats the sinking problem, so that the upstairs floor will remain level in the future.

The homeowners were happy with the outcome and the look of them. They can't wait to proceed with their remodel. Check out their support beam lift!