Thrasher Foundation Repair Before & After Photos

This homeowner was struggling with the sagging floors on the main story of her home. She decided that this was something that was bringing down her quality of life, so she decided it needed to be fixed and she called us.

We sent System Design Specialist Justice Haven to inspect the crawl space. He found that moisture was causing the support beams to sag, and thus the floors were sagging. To fix this problem, Justice and his team used our SmartJacks and supplemental beams to lift the floor back to its original level. 

The homeowner loved the outcome as her floors are now level. Check out her crawl space change!

Russ M. and his brother own a building that is over one hundred years old. They began to notice there were cracks in the foundation walls, and the floors began to sag. They knew it was time to find a solution to help with their settling building. Foundation begins to crack and settle simply because of the dirt or soil it is sitting on. Over time, soil begins to erode and shift, causing the weight of the structure to shift with the movement as well. This will cause cracking, settling, and even sinking floors. 

For this job, Push Piers were installed. This product is made of galvanized steel and allows our team to push down into the earth, to help lift the existing structure. These piers were installed on the inside of the structure, underneath the flooring. Russ and his brother can now rest easy that this one-hundred-year-old building will be preserved for the future. 

Susan was having issues with her crawlspace getting moisture in the area. Moisture in a crawlspace can cause further damage to the floor joints below, such as mold, rot, and beam failure. The crawlspace of your home must be protected to ensure there is no moisture getting in. This can affect your home above. 

For this project, CleanSpace was installed, which is a thick liner, like one in a pool. There was a drainage mat put underneath the CleanSpace, to ensure water and moisture can flow freely beneath the lining, and into the Sump Pump that was installed. A Sump Pump was put in, to help maintain a dry crawlspace, with the final product being a drain line, to help get the water out of the crawlspace. Susan can now rest easy that her crawlspace is protected from the elements. 

Homeowner Scott was looking to solve his concrete problem as it was providing a trip hazard and problems for drainage. He wanted to add value to his home as well as improve his quality of life. Looking for this long-term solution, he decided to give us a call.

System Design Specialist Anthony Salcedo was able to come up with a solution for both of the homeowner’s problems. Using PolyLevel concrete leveling and NexusPro Joint Sealant, Anthony repaired and leveled the concrete so that there is no longer a trip hazard or poor drainage system at Scott's home.

This customer reached out to us because she had a tripping hazard on her walkway leading to her front door. The soil underneath the concrete was not compacted properly so it was creating voids, causing the concrete to sink. To fix this, we used PolyLevel to lift and level the concrete back to its original position and fill those voids to prevent it from happening again.