Thrasher Foundation Repair Before & After Photos

The customer was experiencing waterproofing problems in the basement of this house. Water would get into the basement when there was heavy rain. He would have to push the water over to the drain to get it out of the basement. 

We used our WaterGaurd system all the way around the basement to ensure the whole thing would stay dry. We put in full height clean space to limit the amount of water vapor getting into the home. We also used our triple safe pump to make sure they won't have to deal with the stress of a sump system failure. 

This Homeowner wanted to have their stamped concrete leveled to they would no longer have tripping hazards. 

we used PolyLevel to level the concrete to fix the tripping hazards. We then Sealed the joints and between the house and the concrete with NexasPro to prevent water from washing out the dirt again. 

Brock wanted the concrete raised around his home. He knew that the uneven slabs were tripping hazards, and didn't like the curb appeal of his concrete. The concrete was settling in different directions, which was caused by soil settlement over time. The joints of the concrete were also not sealed, allowing rain and moisture to penetrate beneath the concrete causing further settling and cracking. After the initial inspection, and proposal, Brock noticed more settling around the backside of his home. He was able to call our System Design Specialist, Brock, to talk about another solution to the new settlement in the back. 

For this project, PolyLevel foam was used. PolyLevel foam works better than mudjacking, as the foam compacts the soil beneath, while lifting the existing concrete slabs. NexusPro was then used to seal the joints, to prevent rain and moisture from getting under the concrete. All of our concrete projects are backed with a 5-year warranty. Brock can now rest easy that his concrete won't cause tripping hazards any longer. 

In the warmer months, The home would have a bad odor coming from crawl space. This was because there was no encapsulation that prevented the soil moisture from coming into the house from the access window that is in the basement causing mold to grow. 

We used CleanSpace Encapsulation to ensure that the soil moisture was under control, a SmartDrain to collect and disperse the collected water, and a SaniDry to improve the air quality of her home by lowering the air humidity and getting rid of the nasty smell she was dealing with.

The current supports for this home are cinder blocks that are breaking and offer little to no support as the floor began to fall down. They called Thrasher to come out to replace the old support structures with new. We used a smart jack 350 system to stabilize the home and lift the failing floor back up to its original position.