Thrasher Foundation Repair Before & After Photos

This homeowner wanted to remove trip hazards and make her walkways look better. Her concrete walkway was sinking and settling, which was an eyesore on the front of their home. When we inspected, we found that the soil below the sidewalk had washed out, which was causing the concrete to drop into the voids. To fix, we lifted and leveled the sidewalk with PolyLevel, a foam that is injected to stabilize the concrete. Next, we used NexusPro to seal all the cracks and joints to prevent water from entering and washing out the soil again.

This homeowner was dealing with a repetitively sinking compression guard, creating a trip hazard. The fix the sinking concrete slabs, we used PolyLevel, an injectable foam, to lift the driveway back to its original position. After the PolyLevel, we re-set the compression guard. 

This homeowner wanted to avoid replacing their concrete and find a different solution to fix their cracked driveway. After inspection, we determined the best solution would be to use our three part concrete protection system. This protection system includes PolyLevel to lift and level the slab back to its original position, NexusPro to fill in cracks and joints, and then top it off with SealantPro, to seal and prevent further water intrusion.

This homeowner's front steps were sinking and settling into the soil beneath them. Specifically, the spot where the porch meets the steps had a really low dip due to washout and soil erosion. To fix, we drilled pea-size holes and injected PolyLevel, a polyurethane foam, that lifts and levels sunken concrete. We then caulked and sealed the steps to prevent any future water intrusion. 

This homeowner wanted to repair the downstairs bedroom so she could host her grandkids. In this bedroom, the concrete floor was sinking about 3" in the center of the room. We were able to lift and level the floor using PolyLevel, a polyurethane foam, so now it no longer feels like the room is sinking.