Thrasher Foundation Repair Before & After Photos

This homeowner's front steps were sinking and settling into the soil beneath them. Specifically, the spot where the porch meets the steps had a really low dip due to washout and soil erosion. To fix, we drilled pea-size holes and injected PolyLevel, a polyurethane foam, that lifts and levels sunken concrete. We then caulked and sealed the steps to prevent any future water intrusion. 

This homeowner wanted to repair the downstairs bedroom so she could host her grandkids. In this bedroom, the concrete floor was sinking about 3" in the center of the room. We were able to lift and level the floor using PolyLevel, a polyurethane foam, so now it no longer feels like the room is sinking.

These homeowners had a section of their sidewalk that was settling and are concerned people will trip on it or cause issues for bike riders. As a DIY fix, they tried to put mulch beneath the slab and then found out frogs were living under there! To fix, we lifted the settling sidewalk using PolyLevel foam. This foam is injected through tiny, pea-sized holes in the slab and is able to lift and stabilize most concrete slabs.

This homeowner wanted to fix the tripping hazard on their patio so their kids and family don't hurt themselves. We were able to help by using Poly Level to lift the patio back to its original position and NexusPro to fill the joints and prevent water intrusion.

This homeowner was annoyed with the area where her garage meets her driveway. This is a very common place you can see concrete sinking. But luckily, it's an easy fix! We were able to drill pea-size holes and inject PolyLevel beneath the slab to lift and level the driveway back to its original position.