Thrasher Foundation Repair Before & After Photos

Susan was having issues with her crawlspace getting moisture in the area. Moisture in a crawlspace can cause further damage to the floor joints below, such as mold, rot, and beam failure. The crawlspace of your home must be protected to ensure there is no moisture getting in. This can affect your home above. 

For this project, CleanSpace was installed, which is a thick liner, like one in a pool. There was a drainage mat put underneath the CleanSpace, to ensure water and moisture can flow freely beneath the lining, and into the Sump Pump that was installed. A Sump Pump was put in, to help maintain a dry crawlspace, with the final product being a drain line, to help get the water out of the crawlspace. Susan can now rest easy that her crawlspace is protected from the elements. 

Homeowner Scott was looking to solve his concrete problem as it was providing a trip hazard and problems for drainage. He wanted to add value to his home as well as improve his quality of life. Looking for this long-term solution, he decided to give us a call.

System Design Specialist Anthony Salcedo was able to come up with a solution for both of the homeowner’s problems. Using PolyLevel concrete leveling and NexusPro Joint Sealant, Anthony repaired and leveled the concrete so that there is no longer a trip hazard or poor drainage system at Scott's home.

These homeowners could not use their basement due to the walls caving in and water consistently flooding their home. Concerned, they called our team. Our team fixed this by creating a water-tight seal around the basement walls and installing power braces to the walls to repair the previous damage. The homeowners are thrilled that they can now use their basement without issues. The image above demonstrates the caving walls and water damage in the basement before we started to solve this issue. The after photo shows our power braces that give the walls the structural integrity they were missing, in addition to the waterproof barrier that was installed to prevent further water from causing damage.  

This customer reached out to us because she had a tripping hazard on her walkway leading to her front door. The soil underneath the concrete was not compacted properly so it was creating voids, causing the concrete to sink. To fix this, we used PolyLevel to lift and level the concrete back to its original position and fill those voids to prevent it from happening again.

This customer called us because they had a small area where the walkway and driveway had settled. They were worried about tripping hazards and knew they didn't want to go through the hassle of replacing the concrete. 

Our very own, Sheldon Sharp, went to the home to inspect the driveway and come up with a solution. Upon inspection, he found the water from the downspouts had caused voids underneath the garage approach, causing it to settle and crack. 

To fix this, we used PolyLevel to fill the void and lift the walkway in the garage approach. We then used NexusPro to fill in all the joints and cracks.

These customers were so happy we were able to fix their initial problem and also identify other areas of concern.