Thrasher Foundation Repair Before & After Photos

This customer reached out to us because her seawall next to her yard and home was falling toward the lake. She didn't want to have to deal with the cost and hassle of replacing it if and when it fell all the way in.

When we performed an inspection, we concluded the seawall was falling toward the lake because it had no support on one side and a lot of pressure from the soil on the other. 

This isn't a typical job for us, but we are always happy to take on a challenge and solve a unique problem. To fix the wall, we installed GeoLock anchors to secure the wall on the side of the water. This will give that added support on the side that didn't have anything and will prevent the pressure from the soil from caving in. 

This homeowner recently refinished his floors and wanted to make sure they weren't going to get ruined or "spongy". When we went to the property to perform the inspection, we found the humidity and moisture levels of the wood flooring in the crawlspace was causing the wood to soften and sink, resulting in the spongy feeling they had on the main level on the home. 

The existing concrete support columns were spaced too far apart, which only cause the issue to get worse. On top of that, there was an area under the washer/dryer and kitchen that had zero support with a failing concrete cinderblock, making the entire floor very unstable. 

To fix, we used our CleanSpace vapor barrier system to encapsulate and isolate the earth from the rest of their home, which will help prevent moisture from eating into the wood flooring above. It'll drastically reduce the humidity levels and keep the floor as strong as possible. We also installed our SmartJack system and supplemental beams to solidify the floors and help better support their home. 

This customer reached out to us because an inspector told him he needed to have his crawlspace looked at when he purchased the house.

When we came out to do an inspection, we found the humidity levels were extremely high due to the exposed soil in his crawlspace. The soil was allowing water vapor to release into the organic wood material in the flooring system above.

To fix this, we installed the CleanSpace Vapor Barrier to protect the crawlspace from releasing moisture and reaching the floors. The vapor barrier isolates the home from the earth, providing a layer of protection for moisture and undesirable humidity that comes with it.

This homeowner wanted to fix his concrete before they built a new deck and landscaped around the area.

During our inspection, we determined the driveway slabs had settled due to soil washout. To fix this issue, we did our Concrete Protection Three System on the whole driveway area. This includes PolyLevel to lift the slab to its original position, Nexus to seal cracks and joints, and SealantPro to protect the surface of the driveway from moisture.

The customer was happy with the project and is excited to start on their new deck.

This customer had sunken concrete. Our team at Thrasher Foundation Repair visited the property and determined the best solution would to use PolyLevel to lift, level, and fill the voids in the soil beneath the slab. And then use NexusPro to seal any cracks and joints. 

The customer was happy with the results and glad that there is now no more tripping hazards!