Thrasher Foundation Repair Before & After Photos

JD & Krista H. live in a historic home and were growing tired of home their dining room floors always bounce. When anybody would walk through the dining room, the bouncing floors would cause their china cabinets to rattle. JD & Krista were worried about the problem getting worse overtime and wanted to preserve their home.  

We sent System Design Specialist, Sean Robinson out their home. The existing brick column floor supports, and load-bearing walls were settling due to the high moisture in the basement and water would always come up through the brick floor. This would cause the floors to bounce and sag.

The team SmartJack XTs and supplemental beams to support the floors above. We also installed a TripleSafe, lateral lines and SaniDry Sedona Dehumidifier. This solution will help control water and protect the new floor supports from settling. Once the project was completed JD and Krista were not only impressed with the work that was done but the clean-up done by the crew.

Marvin K. loves having his children and grandchildren over. He noticed that the concrete patio was starting to settle, and the brick steps were starting to pull on the siding. Since his family is always over, he wanted to make sure that the concrete or steps didn’t become a trip hazard. He wanted to make sure the work was done correctly, so he gave us a call.

We sent System Design Specialist, Shane McClintic out to Marvin’s home. Shane was able to identify that the concrete patio had settled 2’’ in spots and had also cracked. The brick steps were layered over the top of the concrete patio and started to pull away from the home. The front driveway and front walkway had also started to settle about 2-3’’ inches in a few different areas. We used PolyLevel, Nexus Pro Joint Sealant, and a 2-part concrete protection system to lift, level and protect the space.

Patricia W. has been worried about the floors in her home for quite some time. She noticed there was serve sagging and anxious that they would collapse. She decided to give us a call.

We sent System Design Specialist Anthony Salcedo out to the home. He was able to identify that there was serve rotting out of the floor joists due to moisture that had occurred.  A carpenter came out and removed the subfloor and repaired the joists prior to install. We were able to support the floor as designed and also encapsulated the crawlspace with CleanSpace.

About 7 years ago Elaine H. had her driveway mudjacked, she started to notice the same area that was mudjacked was starting to settle. After having a bad experience with a previous contractor, she was hesitant to bring another one out. Her neighbor had work done with us and recommend she give us a call.

System Design Specialist Ryan Galt went out to the home and was able to identify a solution. The joints in the driveway where to wide, which was allowing water to go under the slab and cause it to sink in the same spot that the mudjacking had occurred. We used PolyLevel and NexusPro Joint Sealant to seal up the joins and life the concrete back up, so it was all smooth and level

Janice R. lives in the small town of Emerson located in Northeast Nebraska.  In a small town like this people are helping their neighbors especially people like Janice. She called because her driveway was sinking in a few spots. This caused problems when others were doing snow removal for her.  Not just because of the snow removal but Janice just wants her property kept up the right way and to replace her huge driveway would be very expensive.  

Thrasher was able to resolve her problem by leveling the concrete with PolyLevel. We then sealed the joints with NexusPro. Lastly, CompressionGuard was installed to help prevent street creep.