Thrasher Foundation Repair Before & After Photos

This customer wanted to eliminate the trip hazard on their front walkway and also wanted to ensure the concrete would look good and last a long time. The concrete on this driveway settled in a few areas due to soil changes and movement. The driveway joints had also never been sealed which contributed to wash out. To fix this, we lifted and stabilized the concrete with PolyLevel. Next, we sealed all the joints with NexusPro and installed Compression Guard to prevent damage from the pressure of expanding concrete. 

This driveway in Overland Park, KS had large joints that were allowing water to penetrate the concrete slabs. This can cause major damage to the driveway and can also harm vehicles. To fix this, we sealed the joints with NexusPro, a long-lasting and durable silicone-based solution. 

This homeowner in Broken Bow, NE had a foundation wall caving in and water getting into the basement of their home. They didn't want the rest of the house to be damaged because of the lack of support on the foundation. 

Our crew came into the house and noticed sagging floors, causing the wall to fail and allowing water to leak in through the wall and floor. Since the wall was a total failure we used our Everbrace system to support the wall, this system transfers the load from the failing structure to the new support panels. We then added a TripleSafe Sump Pump, to be able to flow and drain the water leaking into the basement out away from the foundation of the home. 

This homeowner had an unlevel driveway with joints that were only getting wider. To make this driveway functional and beautiful again, we stabilized the concrete with PolyLevel and filled the joints with NexusPro. Now, this driveway is as good as new!  

This is a family farm home that the homeowners want to get back into good shape. They wanted to eliminate tripping hazards and get their concrete slab back to its original position. Once we looked at it, we reassured them we were going to be able to bring it back to its original position. Using PolyLevel foam, we lifted and stabilized the concrete slab back to normal!