Thrasher Foundation Repair Before & After Photos

This home's front steps, walkway, and driveway were all settling due to a lack of support in the soil. To fix it permanently, we installed PolyLevel, a polyuretherane foam we inject beneath the concrete slabs to lift and level the concrete back it its original position. We then used NexusPro to seal the joints and ensure water can not penetrate the surface!

This customer wanted to fix the concrete in his driveway. The driveway had cracked all across one of the concrete slabs and into the other sections of the driveway. We were able to level the slabs and broken chunks with our polylevel foam and sealed the crakes and joins with nexus pro to prevent water from getting under the concrete. This fixed his concrete without having to replace the entire driveway. 

At first glance, this might look like your everyday basement. But if you take a closer look, you can see cracks in between the cement blocks and a white, chalky substance known as efflorescence, AKA a clear indication there has been water in your basement. After inspection, we realized hydrostatic pressure was the culprit. To waterproof, we installed a vapor barrier, an interior drainage system, and a sump pump to keep water out!

Lifted and leveled, check! We lifted this sinking concrete back to its original position with our product called PolyLevel. Using a Poly gun, we inject the hardening foam into the voids beneath the concrete. Once the foam hardens, it stabilizes and supports the concrete slab above it.

Wall Repair doesn't have to be messy. Carbon Armor straps help prevent inward wall movement and takes up very little square footage of your basement!